FEATURES
- Flicker free
- Built in active PFC function, high PF, low THD
- Stanby power consumption <0.5W to turn off dimmable port
- Built in DALI dimming function
- Constant current mode output with mulitiple levels selectable by DIP switch
- Supporting multi-power supplys synchronous dimming connected in parallel
- Cooling by free air convection
- Suitable for indoor LED lighting applications
- 3 years warranty
APPLICATION
- LED indoor lighting
- LED office lighting
- LED architectural lighting
ELECTRICAL SPECIFICATIONS
| Input AC voltage | 200-240VAC |
| Input AC current | <0.3A @ 230Vac |
| Input frequency range | 47-63Hz |
| Power factor | PF>0.95 @ 230VAC/full load |
| Total harmonic distortion | THD<15% @ 230VAC/full load |
| Efficiency | 89% |
| Turn on delay | <0.5s @ 230Vac |
| Output DC voltage | 3-84VDC |
| Output DC current | 0.25-0.7A |
| Rated power | 42W Max |
| Operation temperature | -20℃ – 45℃ |
| IP class | IP20 |
| DALI standards | IEC62386-101,102,207 |
| Environmental protection | RoHS |
| Input connection | PCB connector / 4PINs / 0.75-1.5mm^2 |
| Output connection | PCB connector / 2PINs / 0.5-1.5mm^2 |
LABLE SPECIFICATION
MECHANICAL SPECIFICATION
WIRING DIAGRAM
Note
- Standard DALI control line voltage range: 9.5 V to 22.5 V, type 16V.
- The two DALI control lines are polarity-reversible.
- Max. 64 DALI drivers per DALI control line.
- The maximum distance length of the DALI control line is 300m at 2 x1.5mm².
- DALI bus can be wired together with any mains voltage cables, but separate wiring is recommended.